Stainless steel air shower room is a necessary channel for clean rooms, which can reduce pollution problems caused by entering and leaving the clean room, and reduce the large amount of dust particles caused by the entry and exit of people and goods. A fully functional "air lock room" is installed at the entrance of the clean room. It can reduce the number of air pollution particles. When people and goods pass through the air shower, the pollution particles are shot out by the highly clean air with high efficiency filtration. The high wind speed above 25m/s ensures that the effective spray and drift particles pass the initial effect and high efficiency The two-stage filter basically filters out. Especially with the introduction of SC certification, large-scale ozone disinfection machines have become more and more important. In order to maintain the safe use of the air shower and maintain the cleanliness of the clean room environment, the safety points that need to be paid attention to when using the air shower room are first to enter the clean room and take off the coat in the outer dressing room, except for watches, mobile phones, accessories and other items; Secondly, enter the inner dressing room and wear clean clean clothes, hats, masks, and gloves; after pulling the large ozone disinfector into the air shower room, the air shower room will automatically close the outer door immediately, sense, the air shower will automatically start, and blow for 15 seconds .
The air shower is a highly versatile local purification equipment. The large ozone disinfection machine is installed between the clean room and the non-clean room. When people and goods enter the clean area, they need to be blown through the air shower. The clean air blown out can remove the dust carried by people and goods, and can effectively block or reduce the dust source from entering the clean area. The front and rear doors of the large-scale ozone disinfection machine are electronically interlocked, which can also act as an air lock to prevent unpurified air from entering the clean area. The air shower room is a highly versatile local purification equipment in which people or goods enter the clean area and are blown out by the fan through the air shower nozzle with filtered clean strong wind to remove the dust on the surface of people or objects. The air shower room is mainly pressurized by a fan and filtered by a primary filter to blow off the dust and hair on the surface of the personnel and objects entering the clean room to avoid bringing pollution sources into the clean room. If the primary filter is cleaned irregularly, after the primary filter is clogged, the internal air pressure is likely to be too high and the double doors will be pressed open. If it is clogged, the direct result is that the nozzle wind speed is too small, causing poor blowing effect. In addition, the fan presses the wind into the static pressure box. If the filter is blocked, it is easy to cause the instantaneous current to be too large. If the circuit breaker is disconnected, the air shower cannot work. If the fan runs for a long time, it will easily burn the fan. The air shower is the clean equipment of the sterile room and the clean workshop. The large-scale ozone disinfection machine must pay attention to timely cleaning, maintenance and repair, especially the initial effect air inlet and fan air inlet are very easy.